Installation Manual

Specifications
2–6 975-0637-01-01 Rev E
This guide for use by qualified personnel only
Regulatory
NOTE: Regulatory certifications may change without notice. To see the latest
information, visit
solar.schneider-electric.com .
Europe Australia/New Zealand
Safety CE marked for the Low Voltage
Directive 2006-95-EC per:
• IEC/EN 62109-1, Safety of
power converters for use in
photovoltaic power systems
– Part 1: General
requirements.
• IEC/EN 62109-2, Safety of
power converters for use in
photovoltaic power systems
– Part 2: Particular
requirements for inverters
• IEC/EN 60529-1
RCM marked per:
• IEC/EN 62109-1, Safety of
power converters for use in
photovoltaic power systems
– Part 1: General
requirements.
• IEC/EN 62109-2, Safety of
power converters for use in
photovoltaic power systems
– Part 2: Particular
requirements for inverters
• IEC/EN 60529-1
EMC
CE marked for EMC Directive 2004-
108-EC per:
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-3 (generic
residential EMC emissions)
• EN 61000-6-1 (generic
residential EMC immunity)
RCM marked per AS/NZS
61000.6.3, EMC generic
emission standard for
residential, commercial and
light-industrial environments
ConextSWEUROInstallationGuide.book Page 6 Tuesday, July 21, 2015 4:22 PM