Installation Manual

Inverter/Charger Installation
975-0637-01-01 Rev E 1–25
This guide for use by qualified personnel only
Step 5: Connecting the BTS and Xanbus-enabled Components
Battery
Temperature
Sensor (BTS)
Installing a BTS extends the life of a battery by preventing overcharging in warm
temperatures and undercharging in cold temperatures. With a BTS monitoring
the battery temperature, the voltage delivered to the battery is adjusted
according to the battery’s actual temperature.
The BTS has a self-adhesive backing and attaches to the side of the battery. The
BTS also comes with a metal tab. A 7.6-meter cable is supplied with the BTS.
Xanbus-enabled
Components
These include the SCP, the AGS, and a solar charge controller. The order in
which the components are connected to the inverter/charger does not matter.
The most important aspect of the installation of these components is the
attachment of network terminators at each end of the network.
ConextSWEUROInstallationGuide.book Page 25 Tuesday, July 21, 2015 4:22 PM