Specifications Sheet

Device short name XW Power Distribution Panel
Product dimensions (H x W x D) 76.1 x 40.6 x 21.0 cm (30.0 × 16.0 × 8.3 in)
Shipping dimensions (H x W x D) 122.0 x 53.3 x 34.3 cm (48.0 × 21.0 × 13.5 in)
Shipping weight 30.5 kg (67.2 lb)
Product number 865-1015
Included XW PDP enclosure with a field-reversible panel door, includes wall mount bracket, and XW Conduit Box
Three 60 A, 120/240 Vac, two-pole, Square-D, type QOU, DIN-rail mounted AC breakers for AC input, bypass
and ACload (factory-installed), plus five AC breaker expansion postions
One GJ 250A 160 Vdc, 3/8” stud DC breaker installed, plus two expansion positions
Eight expansion positions for charge controller DC breakers
One ground terminal bus bar, one neutral terminal bus bar and one battery negative terminal bus bar
One pair #4/0 AWG Arctic Ultraflex Blue™ battery cables (factory installed and labeled, ready to connect)
#6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)
Device short name XW Connection Kit for INV2
Product dimensions (H x W x D) 22.9 x 40.6 x 21.0 cm (8.5 x 16.0 x 8.3 in)
Shipping dimensions (H x W x D) 44.5 x 33.3 x 30.5 cm (17.5 × 13.0 × 12.0 in)
Shipping weight 10.5 kg (23.1 lb)
Product number 865-1020
Included XW Conduit Box and AC Sync and Xanbus™ cables
Custom designed bypass interlock plate, #6 AWG AC wiring to connect the inverter to the AC breakers
One GJ 250A 160 Vdc, 3/8” stud DC breaker, one bus bar for DC positive and one pair #4/0 AWG battery cables
Three 60 A, 120/240 Vac, two-pole, Square-D, type QOU, DIN-rail mounted AC breakers
Device short name XW Conduit Box
Product dimensions (H x W x D) 22.9 x 40.6 x 21.0 cm (8.5 x 16.0 x 8.3 in)
Shipping dimensions (H x W x D) 44.5 x 33.0 x 30.5 cm (17.5 × 13.0 × 12.0 in)
Shipping weight 4.6 kg (10.0 lb)
Product number 865-1025
Included XW Conduit Box
Device short name 100A, 125VDC Breaker Master Pack (12 units)
Usage XW PDP for MPPT 80 600 output, battery side
Product number 865-1080
Device short name 80A, 125VDC Breaker Master Pack (12 units)
Usage XW PDP for MPPT 60 150 output, battery side
Product number 865-1070
Device short name 60A, 160VDC Breaker Master Pack (48 units)
Usage XW PDP for MPPT 60 150 input, PV array side
Product number 865-1075
Device short name 250A, 160VDC Breaker Master Pack (6 units)
Usage XW PDP for inverter charger connection to battery
Product number 865-1065
Specifications are subject to change without notice.
Technical Specications
Conext XW PDP and accessories
Conext Bridge | 3
© 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its aliated
companies. All information is preliminary and will need to be confirmed at the time of order. 58021186-20033852
Specifications are subject to change without notice.
Exclusion for Documentation
Unless specifically agreed to in writing, seller (a) makes no warranty as to the accuracy, suciency or suitability of any technical or
other information provided in its manuals or other documentation; (b) assumes no responsibility or liability for losses, damages, costs or
expenses, whether special, direct, indirect, consequential or incidental, which might arise out of the use of such information. The use
of any such information will be entirely at the user’s risk; and (c) reminds you that if this manual Is in any language other than english,
although steps have been taken to maintain the accuracy of the translation, the accuracy cannot be guaranteed. Approved content is
contained with the English language version which is posted at htttp://solar.schneider-electric.com