User Manual

XW Mini Power Distribution Panel
XW Series Power Distribution | 2
XW Mini PDP
Part number 865-1013-01
Standards UL
AC Distribution
Included breakers
Three 60 A, 120/240 Vac, two-pole, Square D QOU260 AC breakers for AC input, bypass and AC load
(factory-installed)
Mounting DIN rail (35 mm)
Breaker expansion positions One additional expansion position for a 2 pole Square D QOU breaker
AC wiring
Factory installed and labeled Arctic Ultraflex Blue
TM
wiring, including five #6 AWG Arctic AC cables for AC
connections: L1, L2, Neutral
DC Distribution
Included breakers One GJ 250A 160 Vdc, 3/8” stud DC breaker installed
Mounting Panel mounted
Breaker expansion positions
2 expansion positions for charge controller DC breakers. Can be used for outputs of MPPT 60/80/100, as
well as MPPT 60 input.
DC wiring Integrated DC busbars for easy installation with the XW series inverters
General Specifications
Wiring connections Termination lugs for ground, AC neutral and DC bus bar for battery connection
Enclosure Indoor rated, field-reversible panel door and integrated wall mounting bracket
Certification UL1741, CSA107.1
Product dimensions (H x W x D) 47.0 x 40.6 x 22.5 cm (18.5 x 16 x 8.9 in). 24.9 in door swing clearance, measured from back of unit
Shipping dimensions (H x W x D) 53.5 x 56.5 x 33 cm (21.0 × 28.6 × 13.0 in)
Shipping weight 13 kg (28.2 lb)
The XW Mini Power Distribution Panel (Mini PDP) provides a compact,
easy to install DC and AC power distribution cabinet compatible with the
Conext XW series inverters. The Mini PDP can be used for managing
power distribution to the XW inverter, MPPT Charge Controllers, the
battery, and a generator.
The PDP is designed for compact installation below the XW inverter and
easy installation:
• Includes a main 250 A DC breaker for the battery
• Includes AC breakers for AC input, Bypass, and AC Out (load)
• Breaker expansion positions on DC side for solar charge controllers and
AC side for generator or AC coupled PV inverter
• AC wiring and DC bus bars for direct connection to the XW inverter
• Split phase, single phase applications
• Mounts below the XW inverter
• Multiple conduit knockouts and a field reversable door
• Compatible with Conext MPPT charge controllers, and includes mounting provisions for MPPT 60 150 Charge
Controllers on the either side
• Saves installation time with a pre-wired solution