Installation Guide

All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.

solar.schneider-electric.com

Conext Power Distributuion Panel Installation Guide

865-1015-01 | 865-1014-01

Installing the Surge Arrestor Rail (Optional)

The surge arrestor rail is optional to install.

Attach the side brackets to the

metal studs using the nuts

provided.

Attach the surge arrestors (not

provided with the PDP), to the

rail, feeding the wires through

the cutouts.

Attach the rail to the side

brackets using the four screws

and washers provided.

Mounting considerations:

• If you install more than six AC breakers, there may not be enough room for the surge

arrestor rail. In this case, use the appropriate top or side knockouts for installing the surge

arrestors individually (see B – Knockout Dimensions).

• If you are mounting MPPT charge controllers on the side of the PDP, use the top knock-

outs for installing surge arrestors.

The following surge arrestor devices are available from Schneider Electric:

• Square D SDSA1175

• Square D SDSA3650

Exclusion for Documentation

UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER

(A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION

PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION;

(B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS, OR EXPENSES, WHETHER SPECIAL, DIRECT,

INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF

ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK, AND

MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED, APPROVED CONTENT IS

CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT SOLAR.SCHNEIDER-ELECTRIC.COM.

The following Conext XW+ accessory kits are available for connecting second and third

inverter/chargers to the Conext PDP:

• Conext XW+ Connection Kit for INV2 INV3 PDP (864-1020-02)

• Conext XW+ 120/240V VAC Breaker Kit (865-1215-01)

• Conext XW+ Three-Phase Breaker Kit (865-1315-01)

Additional PDP Accessory Kits