Manual

Warnings and Faults
975-0298-01-01 4–5
Manual
warnings
A manual warning message requires you to make a choice (usually by
pressing Enter for “yes” or Exit for “no”) before you can proceed
monitoring or configuring the Xantrex XW SCP. It will not disappear after
three minutes. After you respond to the warning message the Xantrex XW
SCP clears the warning message and returns to the screen it was
displaying before the warning message appeared.
Clearing Warning Messages
Automatic warning messages clear when the warning condition on the
Xantrex XW SCP disappears or when the criteria for clearing the warning
are met.
You can clear a manual warning message by pressing Enter or Exit in
response to the message.
Viewing Multiple Warning Messages
If several warning messages occur before you can acknowledge or clear
them, they are displayed together on a warning list. The warning list
contains messages from every Xantrex Xanbus-enabled device, not just
the Xantrex XW SCP. You can select a message from the warning list and
view its details.
To view a message from the warning list:
1. On the warning list, use the up arrow or down arrow button to
highlight the warning message you want to view.
2. Press Enter.
The complete warning message appears.
After viewing the warning message, you can return to the warning list by
pressing Exit or continue to the menu for the device that caused the
warning by pressing Enter. Each time you return to the warning list after
viewing a complete message, the viewed message is removed from
the list.
If you have left the warning list, you can view it at any time from the
System Settings menu.
To view the warning list:
1. On the Select Device menu, highlight System Settings and
press Enter.
2. On the System Settings menu, highlight View Warning List and
press Enter.