Manual

Configuration Using the Xantrex XW SCP
975-0298-01-01 3–3
Viewing the Xantrex XW System Control Panel Home Screens
The top level screens on the Xantrex XW System Control Panel are the
Startup screen, the System Status screen and the Device Home screens.
After power is applied and the Startup screen appears, the Xantrex XW
SCP displays the System Status screen. The Device Home screens can
be viewed by pressing the up and down arrow buttons, as shown
in Figure 3-1.
Figure 3-1 Xantrex XW System Control Panel Home Screens
Appears for a few seconds after the system starts
up or when the system has been reset.
Press Enter to
view Select
Device menu.
Select device from
list and press Enter
to view Device
Setup menu.
Press Enter from a Device Home screen
to view the Device Setup menu.
Press Exit from a Device Home screen to
return to the System Status screen.
The number of Home screens depends
on the number of Xantrex Xanbus-
enabled devices installed in the system.