Manual
Installing Conext Gateway Upgrades Remotely
For full instructions, see "Install Package" on page42.
Upgrading Other Device Firmware
It is possible to upgrade a device's firmware through the Conext Gateway web
application.
NOTICE
RISK OF EQUIPMENT DAMAGE
n
Consult the device’s Owner’s Guide when changing the device’s settings.
n
Make sure the device connected on the Xanbus or Modbus network is in Standby
mode before changing settings.
n
Do not change any settings unless you are familiar with the device.
Failure to follow these instructions can result in equipment damage.
Figure 23Sample Device Overview screen - List display
To obtain the firmware package:
1. From a laptop computer, open a web browser.
2. Go to http://solar.schneider-electric.com and download the latest Conext Gateway
firmware version (contained in a ZIP file).
3. Navigate to Products > Battery Based Inverters > Accessories.
4. Click DOWNLOADS > Firmware >FWYYYYMMDD-Product NameVX.XX
BNXXXX (Product Number).ZIP.
5. Pick the firmware version (V) with a higher number and also a higher build number
(BN). The ZIP file is approximately 6 MB.
6. Extract the .xf0 file from the ZIP file into a folder on the local drive.
To upgrade a device firmware:
1. In the main menu bar, click Devices.
2. Put the device in to Standby mode first.
a. Click a device you want to put in to Standby mode.
b. Click Configuration>Controls.
Note that Controls may be called differently such as AGS Control.
Configuration Conext Gateway Conext Gateway Owner's Guide
975-0806-01-01 46