Manual
Changing Device Settings
Before making any changes, familiarize yourself thoroughly with the effects of changing
the settings of another device.
NOTICE
RISK OF EQUIPMENT DAMAGE
n
Consult the device’s Owner’s Guide when changing the device’s settings.
n
Make sure the device connected on the Xanbus or Modbus network is in Standby
mode before changing settings.
n
Do not change any settings unless you are familiar with the device.
Failure to follow these instructions can result in equipment damage.
Figure 21Sample Device Overview screen - Icons display
Conext Gateway Conext Gateway Owner's Guide Configuration
43 975-0806-01-01