Manual

In the Conext Gateway, the SELV circuits and their intended connections are:
n The supplied AC/DC power adapter connected to the power port of the Conext
Gateway.
n Xanbus communications and power which come from SELV circuits on Xanbus-
enabled Schneider products.
n 9–24 V DC power input connections which must be SELV and are connected to the
Conext Gateway via the 26-pin connector.
n Ethernet circuits or Class 2 circuits (Class 2 is a 24V, 100VA limited circuit).
Conext Gateway Web User Interface
This section describes the elements of the web-based user interface for the Conext
Gateway. This interface is used to check the status of the Conext Gateway, configure
the communications options, monitor and log data for your network, and perform
upgrades. The menu bar contains icons for going to the home screen or setup screen,
linking to the Schneider Electric Web site, and closing or logging out of the web user
interface.
Correct operation of the web user interface has been verified with the following
browsers:
n Google Chrome™ 34.x or later
n Microsoft® Windows® Internet Explorer® 10.x or later
n Safari® 5.x or later
IMPORTANT: JavaScript and cookies must be enabled in your Web browser for the
interface to function.
To access the web user interface, log in with a user name and password. For more
details see Logging in to the Conext Gateway Web Application on page 34.
Conext Gateway Conext Gateway Owner's Guide Overview
17 975-0806-01-01