Manual

Introduction
The Conext Gateway is a multi-function communication device that provides an overall
view of system performance for residential power monitoring systems. It also provides a
communications gateway between a network of Xanbus™-enabled devices and Modbus
devices. Operators can configure the Conext Gateway system and monitor performance
with third party software packages and building management systems.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE
n Connect only to Safety Extra Low Voltage (SELV) circuits and power sources.
n All wiring must be done by qualified personnel to ensure compliance with all
applicable installation codes and regulations.
n For Indoor Use Only.
n Do not disassemble. No user serviceable parts inside.
Failure to follow these instructions will result in death or serious injury.
Other features of the Conext Gateway include:
n Compatibility—connects directly to Xanbus-enabled devices
n Real-time clock—keeps time for the entire system
n Non-volatile memory—preserves the latest Conext Gateway settings if power is
interrupted or network communication is disrupted.
n Firmware storage and upgrade capability—uses the Conext Gateway to upgrade or
downgrade firmware for Xanbus-enabled devices on the network.
n Cloud storage capability—Save and synchronize settings with the Conext Gateway
cloud service.
Compatible Xanbus™ Components
The Conext Gateway works with several Schneider Electric products including:
n Conext XW Pro Inverter/Charger
n Conext XW+ Inverter/Charger
n Conext Automatic Generator Start (AGS)
n Conext System Control Panel (SCP)
n Conext SW Inverter/Charger
n Conext MPPT 80 600 Solar Charge Controller
n Conext MPPT 60 150 Solar Charge Controller
n Conext Battery Monitor
Conext Gateway Conext Gateway Owner's Guide Overview
11 975-0806-01-01