Manual

Configuration
3–46 975-0679-01-01 Revision D
8. Once the file is successfully transferred to the Conext ComBox, go to the Xanbus
Device Upgrades section.
9. In Device, click to load the latest list of devices.
10. Select the Device you want to upgrade from the drop-down list.
You can click to confirm you have selected the device you want. When
you click the icon, some type of visual and/or audio indicators on the selected
device will flash.
11. In Firmware file, select the .xf0 file for the device upgrade.
12. Click Upgrade.
Device upgrade progress is indicated in percent and Device upgrade status is OK
when the upgrade has completed successfully.
If the device upgrade is not successful, click Upgrade again to retry.
If retrying does not work:
• Do a power cycle of the Xanbus device that is being upgraded.
• Then, click Upgrade on the web interface.
Conext_ComBox_Owners_Guide.book Page 46 Monday, October 21, 2013 10:00 AM