Manual

975-0679-01-01 Revision D vii
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS - DO NOT DISCARD
This guide contains important safety instructions for the Conext ComBox
Communication and Monitoring Device that must be followed during installation
and configuration procedures.
DANGER
HAZARD OF ELECTRIC SHOCK
• Read all instructions, cautionary markings, and all other appropriate
sections of this manual before installing, operating, troubleshooting or
performing maintenance on the Conext ComBox.
• Exercise extreme caution at all times to prevent accidents.
• These instructions are for use by qualified installers only.
Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK AND FIRE
• Connect only to Safety Extra Low Voltage (SELV) circuits and power
sources.
• All wiring must be done by qualified personnel to ensure compliance with
all applicable installation codes and regulations.
• For Indoor Use Only.
• Do not disassemble. No user serviceable parts inside.
Failure to follow these instructions will result in death or serious injury.
Conext_ComBox_Owners_Guide.book Page vii Monday, October 21, 2013 10:00 AM