Manual

Configuration
3–8 975-0679-01-01 Revision D
Using Network
Time
You can choose to use the network time for your Conext ComBox system.
To use the network time and date:
1. In the menu bar, click .
2. Click in the left side menu.
3. Under Conext ComBox settings, click Network Time (SNTP).
4. In SNTP Server Name, enter the IP address or URL of the network time
server, (pool.ntp.org is recommended) and then click .
5. In SNTP Poll Interval, enter (in hours) how often you want to update the
Conext ComBox system time to the network time and then click .
6. To enable the automatic network time setting, select SNTP State On and then
click .
To disable the automatic network time setting, select SNTP State Off and
then click .
7. To perform a manual network time synchronization (SNTP State must be On),
click under Perform SNTP Synchronization.
Note: If you enable this option, it will replace any manual settings you set
under Time and Zone at the next update according to the SNTP poll setting.
Conext_ComBox_Owners_Guide.book Page 8 Monday, October 21, 2013 10:00 AM