Manual

Connecting the Conext ComBox to an Ethernet Network
975-0679-01-01 Revision D 2–11
4. Connect one end of the Ethernet cable (supplied) to the LAN port on the
network router.
At this stage, the network router should be on but the LED showing port
activity on the router will not show any indication.
5. Connect the other end of the Ethernet cable to the Conext ComBox.
At this stage the Ethernet cable should be the only cable (except for the Dry
Contact if used) plugged into the Conext ComBox.
Step 1: Turn on
the computer
and router.
Step 2
Step 3
Ethernet cable
supplied
Step 4
Step 5
Conext_ComBox_Owners_Guide.book Page 11 Monday, October 21, 2013 10:00 AM