Manual

User Interface
975-0679-01-01 Revision D 1–13
Conext ComBox Setup Buttons
These buttons are found in the Conext ComBox Setup screen.
Links to the Schneider Electric Conext ComBox website.
http://www.schneider-electric.com/products/ww/en/7000-solar-off-
grid-and-back-up/7030-monitoring/62089-conext-combox/
Closes the Conext ComBox web user interface and logs out.
Shows Xanbus Devices of all types in the network.
Shows the Battery status for the network.
Shows system AC output power, voltage and current.
Shows the Grid status of AC input and output to the main utility grid.
Displays the status of solar input energy.
Displays the status of generator input energy.
Item Description
Saves a parameter’s new value to the Conext ComBox.
Recalls (or refreshes) a parameter’s previous value that is still not
saved (or that may have been changed by another device).
Found in E-mail-related settings, the Conext ComBox sends
information out via the e-mail system.
Found only in the Network Time (SNTP) setting, this button performs
a manual network time synchronization.
Found only in General Settings, this button reboots the Conext
ComBox.
Found only in General Settings, this button shuts down the Conext
ComBox.
Conext_ComBox_Owners_Guide.book Page 13 Monday, October 21, 2013 10:00 AM