Manual

Monitoring System Components
975-0679-01-01 Revision D 4–9
4. Click in the left side menu, if you want general energy-related
information gathered by the device, such as energy consumption, output,
and load.
5. Click in the left side menu, if you want information about faults
and warnings reported by the device.
NOTICE
EQUIPMENT DAMAGE
• Consult the device’s Owner’s Guide when changing the device’s settings.
• Ensure that the Xanbus-enabled device connected to the network is in
standby mode before changing settings. See “To set a device in Standby
mode:” on page 3–30.
• Do not change any settings unless you are familiar with the device.
Failure to follow these instructions can damage equipment.
Conext_ComBox_Owners_Guide.book Page 9 Monday, October 21, 2013 10:00 AM