Installation Guide

Configuration
3–52 975-0679-01-01 Revision F
8. Once the file is successfully transferred to the Conext ComBox, go to the
Xanbus Device Upgrades section.
9. In Device, click to load the latest list of devices.
10. Select the Device you want to upgrade from the drop-down list.
You can click to confirm you have selected the device you want. When
this icon is clicked, a visual and/or audio indicator on the selected device will
flash.
11. In Firmware file, select the .xf0 file for the device upgrade.
12. Click Upgrade.
Device upgrade progress is indicated in percent and Device upgrade status
is OK when the upgrade has completed successfully.
If the device upgrade is not successful, click Upgrade again to retry.
If retrying does not work:
• Do a power cycle of the Xanbus device that is being upgraded.
• Retry clicking Upgrade on the web interface.
NOTICE
EQUIPMENT MALFUNCTION
Certain devices such as the Conext Battery Monitor can take longer than
others to upgrade.
Always allow time for the device upgrade to complete. Do not power cycle the
device if the upgrade is still in progress.
Failure to follow these instructions can damage equipment.