Installation Guide

Configuration
3–20 975-0679-01-01 Revision F
FTP Logger
This setting allows the user to push event and detected fault logs to an FTP site.
FTP Log Enable Activate or deactivate FTP logging
features. When activated (Enable), FTP
logs are sent electronically to an FTP
site.
FTP Log Destination Address Specify a valid FTP site.
FTP Log Username Specify the FTP site’s valid user name.
FTP Log Password Specify the FTP site’s valid password in
the (New) field. Repeat the password
in the (Confirm) field.
FTP Log Destination Directory Specify a valid directory on the FTP
site where all the logs will be stored.
Test FTP Logging Test that the FTP Logger settings have
been configured correctly.
Press the button to send a
sample log to the FTP site specified in
FTP Log Destination Address.
Note: It is not recommended to select HOURLY data logs when using the FTP
logging feature as this will result in only the 11pm data log file being pushed to
the FTP server. If you wish to use the FTP logging feature, select DAILY or
MONTHLY logging.