Installation Guide

Configuration
3–18 975-0679-01-01 Revision F
Web
If you want Web access to the Conext ComBox:
•In Web Server Access, select HTTP and then click .
If you do not want Web access to the Conext ComBox:
•In Web Server Access, select Disabled and then click .
The default value of the Web Server Port is 80. If this value is changed to 8080,
you must append the URL address with “:8080” at the end of the IP address.
Note: You must restart ComBox after changing the Web Server Port.
Note: If the Web server is disabled (for example, for security reasons), the
Web server will not be available on the next reboot of the Conext ComBox. To
regain access to the Web server, “Resetting the Conext ComBox to Factory
Settings” is necessary to make configuration changes.