Installation Guide

Changing Conext ComBox Settings
975-0679-01-01 Revision F 3–15
TCP/IP Settings
By default, the Use DHCP parameter is set to Yes. By enabling DHCP, the four
parameters (TCP/IP Address, TCP/IP Net Mask, Gateway Address, and DNS
Server Address) are filled automatically. If the Use DHCP parameter is set to No,
you have to manually fill the four parameters with static IP addresses.
E-mail Settings
See “Changing E-Mail Settings” on page 3–7.
Note: Only a qualified IT professional should perform changes to any TCP/IP
related settings.