Installation Guide

Configuration
3–6 975-0679-01-01 Revision F
4. Click to display the current time.
5. To change the Date/Time, enter it in the same format as shown
(YYYY/MM/DD HH:MM:SS) and click Set Time.
6. To set the Time Zone, select from the drop-down list and click Set Time Zone.
Using Network
Time
You can choose to use the network time for your Conext ComBox system.
To use the network time and date:
1. In the menu bar, click the arrow to the left of ComBox Configuration to
expand the menu.
2. The Configuration menu appears. Click in the menu bar.
3. Under Conext ComBox settings, click Network Time (SNTP).
4. In SNTP Server Name, enter the IP address or URL of the network time
server, (pool.ntp.org is recommended) and then click .
5. In SNTP Poll Interval, enter (in hours) how often you want to update the
Conext ComBox system time to the network time and then click .
6. To enable the automatic network time setting, select SNTP State On and then
click .
To disable the automatic network time setting, select SNTP State Off and
then click .
7. To perform a manual network time synchronization (SNTP State must be On),
click under Perform SNTP Synchronization.
Note: This date/time setting overrides settings on other devices in the system.
Note: If you enable this option, it will replace any manual settings you set
under Time and Zone at the next update according to the SNTP poll setting.