Installation Guide

About This Manual
iv 975-0679-01-01 Revision F
Abbreviations and Acronyms
DHCP - Dynamic Host Configuration Protocol
LED - Light Emitting Diode (used for indicator lights)
SELV - Safety Extra Low Voltage
SNTP - Simple Network Time Protocol
TCP/IP - Transmission Control Protocol/Internet Protocol
Related Information
Related Products
For more information about related products, refer to:
Conext XW+ Inverter/Charger Owner’s Guide
Conext Solar Charge Controller Owner’s Manual
Xantrex XW Automatic Generator Start Owner’s Guide
Conext System Control Panel Owner’s Guide
Conext SW Inverter/Charger Owner’s Guide
Conext MPPT 80 600 Solar Charge Controller Operation Guide
Conext MPPT 60 150 Solar Charge Controller Operation Guide
Grid-Tie-AUS Solar Inverter Owner's Manual
Conext TX Solar Inverter Owner's Manual
You can find more information about Schneider Electric as well as its products
and services at solar.schneider-electric.com.
For specific information regarding Solar products go to solar.schneider-
electric.com
Modbus Revision F Maps
Modbus maps are not included in this guide. They are available at http://
solar.schneider-electric.com/product/conext-combox/. The following Modbus
maps are used with the Conext ComBox:
• Conext SW Modbus Map (503-0244-01-01)
• Conext
XW Modbus Map (503-0246-01-01)
• Conext Automatic Generator Start Modbus Map (503-0247-01-01)
• Conext MPPT 60 150 Modbus Map (503-0248-01-01)
• Grid-Tie/TX Modbus Map (503-0250-01-01)
• Conext System Control Panel Modbus Map (503-0251-01-01)
• Conext MPPT 80 600 Modbus Map (503-0252-01-01)
• Conext Modbus Converter/ComBox Modbus Map (503-0253-01-01)