Installation Guide

975-0679-01-01 Revision F iii
About This Manual
Purpose
The purpose of this Installation and Configuration Manual is to provide
explanations and procedures for installing, operating, configuring, maintaining,
and troubleshooting the Conext ComBox Communication and Monitoring Device.
Scope
The Manual provides safety guidelines, planning, and setup information,
procedures for installing the Conext ComBox, as well as information about
configuring, monitoring, and troubleshooting the unit. It does include information
on how to use other Schneider Electric products.
Firmware Revision
Some Conext ComBox features and functions described in this guide may be
incorporated with later firmware versions. This manual is valid for Conext
ComBox version 01.00 and above. To view the firmware version on your product,
see the Conext ComBox Status Information in the web user interface.
Audience
The Manual is intended for use by anyone who plans to construct, install, or
operate a system involving the Conext ComBox. The information in this manual is
intended for qualified personnel. Qualified personnel have training, knowledge,
and experience in:
• Installing electrical equipment
• Applying all applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Changing any TCP/IP-related settings
Organization
This Manual is organized into five chapters and an appendix.
Chapter 1, “Overview”, describes physical features of the Conext ComBox and
introduces the user interface.
Chapter 2, “Installation”, describes how to install, wire, and connect the Conext
ComBox to your network.
Chapter 3, “Configuration”, describes how to configure and change device
settings, manage data logs, import and export data
, and upgrade firmware.
Chapter 4, “Monitoring”, describes how to monitor LED indicator lights (LEDs),
system and device levels, and create historical views.
Chapter 5, “Troubleshooting”, describes how to interpret events and alerts.
Appendix A, “Specifications”, contains the electrical, mechanical and
environmental specifications for the Conext ComBox.