Installation Guide

Specifications
A–2 975-0679-01-01 Revision F
Electrical Specifications
Communication Interfaces
Data Interfaces
Power Supply (SELV on all sources)
Memory
Xanbus Connector: 2 x RJ45
Products Supported: Conext XW+, SW, TX, MPPT 60
150, MPPT 80 600, AGS, SCP - for details on specific
Schneider Electric products supported see “Schneider
Electric Products that work with the Conext ComBox”
Ethernet Connector: 1 x RJ45, 10/100 MBPS
Server: FTP, Web, Modbus TCP/IP
Client: SMTP, SNTP, Auto discovery: DPWS
RS 485 Modbus (1 x Connector: Screw 5-terminal, 16-24AWG,
2-wire serial, 19200 bps)
Products Supported: Conext RL, TL, and CL inverters,
PM800 Series power meter.
USB 2.0-Host Connector: USB-A, Protocols: MSD
USB 2.0-Device Connector: USB-mini B, Protocols: CDC, MSD
Data transfer interfaces USB Host, USB Device, Micro-SD Card
User Interface Status indicator LEDs on Conext ComBox
Web-server pages for Configuration and Monitoring
functions
Power Consumption 2 W average / 10 W peak
AC/DC adapter
(supplied)
a
a.When ordering a replacement, reference PN: 0J-921-0023-Z.
Input: 100-240V AC, 50-60Hz, 0.6A,
Output: 12V DC, 1.5A, 5.5mm outer, 2.1mm center-
positive jack
Xanbus When connected to Conext XW+ / SW or
MPPT 80 600 providing 15V DC, 200mA min
24V on RS 485 Modbus
connector
24V DC, 1A max input only through pins 4 and 5
Internal 96 MB Flash
External Micro-SD Card (Connector: uSD push-push, Class 2
or better recommended)