Installation Guide

Managing Data Logs
975-0679-01-01 Revision F 5–9
Managing Data Logs
Data logging is an integral function of the Conext ComBox. Data logs record vital
information about the electrical system including information about devices in the
Xanbus network. Information such as energy consumption, battery charging
status, grid energy output, generator output, and system fault detections cannot
be displayed in a useful manner without taking data out of data logs. There are
two types of data logs - Events and custom Logs.
Events Log The Conext ComBox records its own device events as well as system-wide faults
and warnings that have been detected. You can display this information by
accessing the Events log.
To access the Events Log:
1. In the menu tree, click the arrow to the left of ComBox Configuration to
expand the menu.
2. Click from this menu.
A System Events screen, similar to the example shown below, displays.
By default, the System Event Type displays Faults and Warnings detected
within the system. This includes each device that reported a fault, the time it
occurred, and a brief description.
3. Click the System Event Type drop-down button to select Events.
The System Event Type displays a log of events recorded by the Conext
ComBox device such as Login and Logout events.