Specifications Sheet

Technical Specications
Conext™ Bridge
Device short name Conext™ Bridge
Electrical specifications
Communication interfaces
Xanbus Connector: 2 x RJ45 (white)
Products Supported: Conext™ XW+, Conext™ SW4048, MPPT 60-150, MPPT 80-600, AGS, SCP, ComBox
Ethernet Connector: 1 x RJ45 (green)
Modbus - RS 485 Connector: Terminal block - Isolated - Manual switch for termination
Canbus - Li-ion BMS Connector: 1 x RJ45 (orange)
Data interfaces
USB 2.0 - Host Connector: 1 x USB-A 5V, 1.5A (Protocols: MSD (firmware upgrades and device locator))
USB 2.0 - Device Connector: 1 x micro USB-B (Protocols: MSD (advance configurations and settings))
Power supply options
AC / DC adapter Input: 100-240Vac, 50-60Hz, 0.6A, Output: 12VDC, 1.5A, 5.5mm outer, 2.1mm center-positive jack DC input
Xanbus When connected to Conext™ XW+ / SW or MPPT 80 600 providing 15VDC, 200mA min or more
Power Consumption <3.7W Typical / 10W Peak
Memory
Internal 4GB Flash Memory
External Supplied with 4GB Micro SD card (can be upgraded to 16GB micro SD card)
General specifications
Weight 300g (0.66lb)
Dimensions (H x W x D) 123 x 128 x 41mm (4.8 x 5 x 1.6in.)
Housing / Mounting System Plastic / DIN-rail: 35mm, Wall-mount: 2-screw
IP rating / Mounting Location IP20, Indoor only
Status Display 6 x LEDs
Temperature Operating: -4 to 131°F (-20 to 55°C)
Storage: -40 to 185°F (-40 to 85°C)
Part Number 865-0326
Features
Digital inputs / outputs 2 x 12VDC/5VDC at 15mA
Dry Contact Relays (NO / NC) Form C 2 x 24VDC at 4A
Buzzer 1 (programmable)
Maximum Supported System Size Please refer to the Conext™ Bridge Compatibility Matrix Document on our website for more information
Warranty 5 years
Regulatory
Marking CE, RCM
EMC immunity EN61000-6-1
EMC emission EN61000-6-3, FCC Part 15 Class B, Ind. Canada ICES-003 Class B
Substances / environmental RoHS
© 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries
SAS or its aliated companies. All information is preliminary and will need to be conrmed at the time of order.
DS20170511 Conext Bridge
Conext™ Bridge | 3
Specifications are subject to change without notice.
Exclusion for Documentation
Unless specifically agreed to in writing, seller (a) makes no warranty as to the accuracy, sufficiency or suitability of
any technical or other information provided in its manuals or other documentation; (b) assumes no responsibility or
liability for losses, damages, costs or expenses, whether special, direct, indirect, consequential or incidental, which
might arise out of the use of such information. The use of any such information will be entirely at the user’s risk;
and (c) reminds you that if this manual Is in any language other than English, although steps have been taken to
maintain the accuracy of the translation, the accuracy cannot be guaranteed. Approved content is contained with
the English language version which is posted at htttp://solar.schneider-electric.com
For indoor use only