Product Manual

Warning Messages
975-0307-01-01 5–3
If you have left the fault list or warning list, you can view them at any time
from the System Settings menu.
To view a fault list or warning list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Fault List or View
Warning List.
3. Press Enter.
Warning Messages
Table 5-25 provides details and suggests action for Xantrex XW AGS
warnings.
Table 5-25 Xantrex XW AGS Warning Messages
Warning
Number Message
Self-
clearing? Cause Action
W200 Generator
was stopped
manually.
No Generator was
stopped by an
external Manual Off
switch.
Acknowledge the warning. To
resume automatic starts and
stops, change the Xantrex XW
AGS mode to [Automatic].
W201 Generator
was started
manually.
No Generator was
started by an
external Manual On
switch
Acknowledge the warning. To
resume automatic starts and
stops, change the Xantrex XW
AGS mode to [Automatic].
W202 Unable to
start
generator.
Xantrex XW
AGS will try
again.
Yes The Xantrex XW
AGS tried, but could
not start the
generator.
No action required. The Xantrex
XW AGS will try to start the
generator again until it reaches
the maximum number of start
tries.