Product Manual

Configuration
3–6 975-0307-01-01
When the Xantrex XW AGS Home Screen is first displayed, the menu
defaults to the GenMode Menu.
If configuration changes need to be made, the Configuration Menu can
be accessed by pressing the ENTER button, the Up Arrow button, and
Down Arrow button all at same time to access the Advanced Settings.
Figure 3-32 Xantrex XW AGS Configuration Menu Contents
Enter Exit
System Control Panel
AC In/Charge
Inverter On
Low Battery
Fau lt
System
XW AGS 00: Setup
[ManualOff]
[Operating]
XW AGS 00: Setup
[ManualOff]
[Operating]
XW AGS 00: Config
[Enabled]
[9:00PM]
[8:00AM]
[2]
XW AGS 00: Triggers
[44.5V]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[10A]
[7A]
XW AGS 00: Gen
[60sec]
[30sec]
[3sec]
[8hours]
[21days]
[30min]
[9:00AM]
[NotUsed]
[0.5sec]
[0sec]
[30sec]
[40sec]
[0sec]
[3]
XW AGS 00: Multi
[AGS]
[00]
XW AGS 00: Conn
[HouseBatt1]
[Grid1]
[ACLoad1]
[Gen1]
Enter
Enter
Enter
Exit
Enter
Enter
For details on the
Configuration menu
options, see page 3–7.
Xantrex XW AGS Menu
To change configuration
parameters...
Press Enter to move forward
into the Config menu.
Use the arrow buttons to
change the settings.
Press Enter to accept
the new setting
To access the Advanced
Settings menu:
Press Enter, Up arrow and
Down arrow together.
To return to the Basic
Xantrex XW AGS menu:
Press Enter, Up arrow and
Down arrow together.
Press Exit to return to the
Xantrex XW AGS Home
screen
Press Enter to move the
cursor to the
changeable settings
Use the arrow buttons to select
the desired menu item.