Product Manual

Installation
2–28 975-0307-01-01
Connecting the Wiring Harness to the Xantrex XW AGS
After all the external connections have been wired to the wiring harness,
the connector on the wiring harness must be plugged into the 20-contact
connector on the Xantrex XW AGS.
To connect the wiring harness to the Xantrex XW AGS:
◆ With the click-tab on the wiring harness connector on top (away from
the mounting surface), insert the wiring harness connector into the
20-contact connector on the Xantrex XW AGS until the tab clicks into
place.
Figure 2-24 Xantrex XW AGS External Connections