Product Manual

Installing the Xantrex XW Automatic Generator Start

975-0307-01-01 2–21

Type 12

Type 12 is a three-wire GlowStop configuration recommended for “three-

wire” generators that don’t require a dedicated preheat signal. In this

configuration, the start signal is applied for longer because the generator

does its own preheat and cranking while the start signal is applied.

Figure 2-20 Type 12 Connection Diagram

Table 2-16 Type 12Relay and Timing Preset Configurations

Relay Function Preset Configuration Setting

Relay 1 mode

GlowStop

Relay 3 mode

No function

Gen Run signal hold time

4 s

Preheat time

0 s

Preheat to crank delay

0 s

Crank time

30 s

Crank retry time

40 s

Gen Cool Down

30 s

Gen Spin Down

3 s

Shutdown bypass time

0 s

Start tries

Relay 1

Relay 2

5A fuse

GENERATOR RUN SIGNAL

GENERATOR BATTERY NEGATIVE (–)

STOP

START

XW AGS Harness Wires Generator Wires

For additional information, see

“Circuit Limitations” on page 2–5.

GENERATOR RUN SIGNAL

GENERATOR RUN SIGNAL RETURN

START

STOP