Product Manual

Features
975-0307-01-01 1–5
Features
Indicator Lights Four lights on the front panel indicate the operating status and network
status of the Xantrex XW AGS.
Connectors Two network ports on the bottom panel connect the Xantrex XW AGS to
the Xantrex Xanbus system. A 20-contact pluggable connector (also on
the bottom panel) allows the Xantrex XW AGS to connect to the
generator’s starting circuitry, thermostats and external switches. See
“Bottom Panel” on page 1–6.
Front Panel
Figure 1-2 Xantrex XW AGS Front Panel
Table 1-1 Front panel features
Feature Description
1
Power light (green) indicates the Xantrex XW AGS
is
receiving network power.
2 Generator On light (green) indicates the generator is
running. This light turns on when the generator run signal is
active.
See “Important” on page 2–27.
3
Network light (green) indicates the Xantrex XW AGS
is
communicating with other Xantrex Xanbus-enabled
devices.
4 Fault light (red) indicates an Xantrex XW AGS fault has
occurred.
See “Troubleshooting” on page 5–1 for information about
Xantrex XW AGS faults.
1
2
3
4