Installation Guide

Operation
4–2 975-0400-01-01 Revision G
This manual is for use by qualified personnel only.
Viewing Operating Status
The Conext MPPT Solar Charge Controller (solar charge controller) has four
buttons and a 2-line, 16 character liquid crystal display (LCD) for configuration
and displaying system information and operating status.
• When in Charge Control mode the LCD shows the output power, voltage and
current (and additional information as shown in Figure 4-1).
• When a fault condition exists, the LCD shows “Fault Active.”
• When battery equalization is taking place, the LCD shows “Equalization
Pending” (when bulk/absorption charging prior to equalization) and “mm:ss
remaining” while applying the equalization charge.
LCD Screens and What They Mean
The front panel display shows different message screens during startup and
normal operations. Figure 4-1 shows the sequence in which the Startup and
Operating screens are displayed or can be viewed.
All of these message screens are described in more detail in the following
sections.