Information

Product Environmental Profile – PEP
ENVPEP1511013_V1 / PEP Ecopassport SCHN-2015-174 Published by: Schneider Electric 11-2015
Product overview
The main purpose of XMLP001GD21F and more generally of any pressure transmitter, installed in automated
installations, is to transmit to the information system an electrical analogue signal proportional to the pressure of
fluid in contact with its membrane.
The XMLP Low pressure range (from -1 to 6 bar, -14,5 to 60 psi) consists in stainless steel pressure transmitters
with a ceramic pressure cell technology inside. This product range has several pressure size covering the low
pressure from -1 to 6 bar, -14,5 to 60 psi, includes different fluid entries as
G1/4, ¼”-18NPT or 7/16-20UNF,
different electrical connections as M12, EN175301-803-A, Packard Metripack or cable, different analogue signal
as 4-20mA, 0-10V or ratiometric 10-90%.
The representative product used for the analysis is XMLP001GD21F (including its packaging). The environmental
.04041 OSI htiw ytimrofnoc ni demrofrep saw sisylana
The functional unit is to provide with a reliable, linear and accurate electrical signal (4-20 mA) proportional to the
pressure (pressure range between 0 and 1 bar for XMLP001GD21F) applied on its ceramic pressure cell during 10
years with IP67&IP69 protection degrees.
The representative product used for the analysis is
XMLP001GD21F (including its packaging). The environmental
.04041 OSI htiw ytimrofnoc ni demrofrep saw sisylana
The environmental impacts of this referenced product are representative of the impacts of the other products of the
range which are developed with a similar technology. However to know the accurate environmental impacts of
other products in the XCKS range, complementary calculation has to be done,
please contact us at: global-
[e-mail]
Constituent materials
The mass XMLP001GD21F Pressure Transmitter is 80 g including packaging (15 g packaging). The constituent
materials are distributed as follows:
Substance assessment
Products of this range are designed in conformity with the requirements of the European RoHS Directive
2011/65/EU and do not contain, or only contain in the authorised proportions, lead, mercury, cadmium, hexavalent
chromium or flame retardants (polybrominated biphenyls - PBB, polybrominated diphenyl ethers - PBDE) as
mentioned in the Directive
Details of ROHS and REACH substances information are available on the Telemecanique Sensors website
(
http://www.tesensors.com/uk/en/support/reach-rohs/
)
Manufacturing
The XMLP Low pressure product range is manufactured at a production site on which an ISO14001 certified
environmental management system has been established.