User`s manual

3. Setup for the communication option cards

3. 10. 5. Communication fault

DeviceNet communication faults are indicated by the red RD LED on the card.

The

[Network fault] (CnF-) parameter can be used to obtain more detailed information about the origin of the fault. It can only be

accessed on the graphic display terminal, in the

[1.10 DIAGNOSTICS] (dGt-) menu, [MORE FAULT INFO] (AFI-).

Value Description of the values of the [Network fault] (CnF-) parameter

0 No fault

1 Fault caused by the user

2 Duplication of the MAC ID address

3 Error on the reception buffer

4 Error on the transmission buffer

5 Initialization fault on the drive DeviceNet card (hardware problem)

6 Error during sending of a telegram

7 DeviceNet bus not operating

8 Time out for receipt of periodic variables destined for the drive. This time out can be set by the network configuration software.

9 Cyclic or COS data acknowledgement error