User`s manual

29
2. Drive setup
2. 3. Mounting the RFI filter
The dimensions given in the following sections can be used to compare the dimensions of the Altivar 58 RFI filters with those used on the
Altivar 71.
These tables only include examples where the Altivar 71 filters take up more space than those fitted on the Altivar 58, as well as the
proposed solutions.
It is important to remember that, without exception, it will be necessary to adapt the mounting as the fixing centers are not the same.
2. 3. 1. Use in High Torque (170% of Tn) for catalog numbers starting with ATV58H
2. 3. 1. 1. Single or three-phase supply 200…240 V for catalog numbers starting with ATV58H.
For performance and technological reasons, the Altivar 71 RFI filters are bulkier than those of the Altivar 58.
This difference can be compensated for due to the need to leave space for the Altivar 58 wiring.
It is also still equally possible to mount the filter on the side of the Altivar 71 (see page 33
)
Drive Filter
Width Height Depth Fixing
a b c G H
ATV58HU09M2 VW3A58401 113 246 36 94.5 230
ATV 71H075M3 VW3 A4 401 130 290 40 105 260
ATV58HU29M2 VW3A58402 150 276 60 133 260
ATV 71HU22M3 VW3 A4 401 130 290 40 105 260
ATV58HU41M2 VW3A58402 150 276 60 133 260
ATV 71HU30M3 VW3 A4 402 155 324 50 130 309
ATV58HD46M2X VW3A58408 350 770 110 300 770
ATV 71HD30M3X VW3 A4 408 320 750 119 280 725
ATV58HD46M2X VW3A58408 350 770 110 300 770
ATV 71HD30M3X VW3 A4 408 320 750 119 280 725
ATV58HD33M2X VW3A58408 350 770 110 300 770
ATV 71HD30M3X VW3 A4 408 320 750 119 280 725
ATV58HD46M2X VW3A58408 350 770 110 300 770
ATV 71HD37M3X VW3 A4 408 320 750 119 280 725