User`s manual

25
2. Drive setup
2. 1. 2. Use in Standard Torque for catalog numbers starting with ATV58H
In this section, the Altivar 71 dimensions include the graphic display terminal (this graphic display terminal is the same depth as an option card).
For this product range, the Altivar 71 dimensions are the same as or less than those of the Altivar 58.
2. 1. 2. 1. Three-phase supply 200…240 V for catalog numbers starting with ATV58H
The substitution kits can use the same fixings as those for the Altivar 58.
Comparison of dimensions
(1) No problem if space is left between 2 drives. Width incompatible if the ATV58(F) drives are mounted side by side.
(2) This difference is easily made up by the space required for the drive wiring.
(3) The depth of enclosures is usually considerably greater than that of the products.
If the enclosure depth poses a problem, it is always possible to order an Altivar 71 with a Z at the end of the catalog number. Your drive will
be supplied without a graphic display terminal and will, therefore, be 23 mm slimmer, e.g., ATV 71H075N4Z.
Width (1) Height (2) Depth (3)
ATV58HD16M2X 240 550 283
ATV 71HD15M3X 230 400 210
ATV58HD23M2X 240 550 283
ATV 71HD18M3X 240 420 210
ATV58H28M2X 350 650 304
ATV 71HD22M3X 240 420 210
ATV58HD33M2X 350 650 304
ATV 71HD30M3X 320 550 240
ATV58HD46M2X 350 650 304
ATV 71HD37M3X 320 550 240