User`s manual

21
1. Determining catalog numbers
1. 6. 5. Communication with INTERBUS bus (VW3A58304(E))
Card catalog number
Installation and connection
For the Altivar 71, keep the existing connections.
It is essential to use the Altivar 71 control card’s external power supply function so that the bus token can circulate continuously
(see page 37
).
1. 6. 6. Communication via Ethernet network (VW3A58310)
Card catalog number
Installation and connection
For the Altivar 71, keep the existing connections.
1. 6. 7. Communication via Fipio bus (VW3A58301(A) or VW3A58311)
Card catalog number
Installation and connection
If a TSX FP ACC12 connector is used to link the Altivar to the bus, keep the existing connections. However, it is necessary to alter the
position of the cable(s) when using a TSX FP ACC2 connector (see page 54
).
(g) The VW3A58301A card was dedicated to a Fipio application on Series 7 PLCs. When this is being replaced by a VW3 A3 301 card,
the wiring must be modified so that a stop command can be issued to the drive (Power Removal open) when the PLC is stopped.
1. 6. 8. Communication via CANopen bus (VW3A58308)
Card catalog number
The Altivar 71 integrates the ATV58 CANopen communication card’s connection and services as standard (VW3A58308).
It is however necessary to modify the wiring.
1. 6. 9. Communication via AS-i bus (VW3A58305)
Card catalog number
Although the AS-i communication card has not been continued in the Altivar 71 offer, there is a solution for substitution using a 4-input/
4-output module on the AS-i bus.
ATV58(F) ATV 71
VW3A58304 VW3 A3 304
VW3A58304E VW3 A3 304
ATV58(F) ATV 71
VW3A58310 VW3 A3 310
ATV58(F) ATV 71
VW3A58301 VW3 A3 301
VW3A58301A VW3 A3 301 (g)
VW3A58311 VW3 A3 311
ATV58(F) ATV 71
VW3A58305 ASI 20M T4I4OS
To adapt the wiring, order:
- 9-way Sub-D connector (1 per drive): VW3 CAN KCDF 180T
- 9-way Sub-D/RJ45 adapter (1 per drive): VW3 CAN A71
ATV58(F) ATV 71
Screw terminals 9-way Sub-D