User`s manual
17
1. Determining catalog numbers
1. 5. 2. ATV58F and I/O option cards (VW3A58201, VW3A58202)
Required information: Connection diagram, presence of an I/O extension card
As standard the ATV 71 has more I/O than the ATV58F.
Use the VW3 A3 401 card if an encoder is connected to the ATV58F (closed-loop mode).
• If the ATV58F is not equipped with an I/O extension card, there is no need to add a card to the Altivar 71. Ignore this section.
• If the ATV58F is equipped with an I/O extension card, it is important to know which inputs/outputs are used as well as the function
assigned to AI3 (VW3A58201 card) and to encoder input A, A
, B, B (VW3A58201 card).
The tables below can be used to ascertain what was used previously and, therefore, to find the equivalent on ATV 71 with or without an
option card.
Scenario 3: Replacing an ATV58F with or without a VW3A58201 option card:
Used: Becomes:
ATV58(F) ATV 71 Description VW3A58202
VW3... card
Description
A3 201 A3 202 A3 401
R1A/R1B/
R1C
R1A/R1B/
R1C
Fault relay
contacts (R1)
COM 0 V 0 V Common
R2A/R2C R2A/R2C
Programmable relay
contacts (R2)
R3A/R3B/
R3C
R4A/R4B/
R4C
Programmable
relay
COM COM Analog input common -10 -10 -10 V output
AI 1A AI 1+
±10 V bipolar
analog input
TH1+ TH2 + PTC probe
AI 1B AI 1-
±10 V bipolar
analog input
TH1- TH2 - PTC probe
+10 +10
Power supply for
1to10 k
Ω reference
potentiometer
+24 +24 +24
Logic input
power supply
AI2 AI 2 0..20 mA analog input
LI 5 also on
mother board
LI 7 LI 11
24 V DC
programmable
logic input
AO1 AO 1
0-20 mA
analog output
LI 6 also on
mother board
LI 8 LI 12
24 V DC
programmable
logic input
LI 1 LI 1
24 V DC
Run forward logic
inputs
LI 9 LI 13
24 V DC
programmable
logic input
LI 2 LI 2
24 V DC
programmable
logic input
LI 10 LI 14
24 V DC
programmable
logic input
LI 3 LI 3
Logic input
power supply
LO LO 1 LO 3 Logic output
LI 4 LI 4
24 V DC
programmable
logic input
LO 2 LO 4 Logic output
+24 +24
Logic input
power supply
LO + CLO CLO
Logic output
power supply
LI 5
24 V DC
programmable
logic input
AI 3A/AI3 B
see page 18
Current AI3
+/AI3 -
Programmable
logic input
LI 6
24 V DC
programmable
logic input
AI4
Programmable
analog input
AO AO 2
Programmable
analog output
AO 3
Programmable
analog output
FP Pulse input
+10 +10 V output
A Encoder input A Encoder input
A- Encoder input A- Encoder input
B Encoder input B Encoder input
B- Encoder input B- Encoder input
0 V Encoder 0 V 0 V Encoder 0 V
5 V Encoder 5 V PES Encoder 5 V