Product manual

TAC Xenta 527-NPR, Product Manual 1 About this Manual
Schneider Electric Buildings AB, Mar 2010 11 (42)
04-00053-01-en
1.4 How to Use this Book
This document follows a standard style indicating keystrokes, cursor
movement, navigation, and data entry. TAC software is intended to be
used primarily with a mouse. However, you may use keyboard equiva-
lents as indicated below.
Filenames
Filenames appear in this manual as they appear on the screen of your
computer. To further identify them as files, they appear as uppercase,
italicized letters with any file extensions included. For instance, the con-
figuration file used by your computer upon start up is shown as CON-
FIG.SYS.
Keystrokes
Keystrokes are shown in bold surrounded by square brackets. For exam-
ple, the Y key is shown as [Y], and the Enter key is shown as [Enter].
Certain standard keys are used within the application to perform certain
system functions within editors, message boxes, etc. These are the
[Enter], [Esc], [Tab], and Up and Down Arrow keys.
• [Enter] Key — Use this key to accept or activate a function, typi-
cally a highlighted button.
• [Esc] Key — Use this key to cancel an action or editor. You may
use the [Esc] key to back up from successive levels of windows
until you return to the main application window.
• [Tab] Key — Use this key to cycle through the available active
buttons or entry fields in an editor or screen.
• Up/Down Arrows — Use these keys to move the highlighted
selection from one item to another in the various list, drop-down,
and combo boxes found in the editors.
1.5 Related Documents
• TAC Xenta 500/700/911/913, Installation Instruction
Part No.: 02-00001
• TAC Xenta 500/700/911/913, Product Manual
Part No.: 04-00071
• TAC Xenta Server – TAC Networks, Technical Manual
Part No.: 04-00121
• TCON300, I/NET Seven Technical Reference Guide
• TCON298, I/NET Seven Getting Started