Datasheet

8
TAC MENTA
TM
TAC Menta is the programming software tool for the TAC Xenta
TM
controllers. You
will save time and improve operational reliability with this engineering tool for HVAC
applications.
TAC Menta:
• Provides many pre-programmed function blocks and basic application elements
• Monitors offline simulations and online testing with an integrated trend log
TAC XENTA
All TAC Xenta controllers provide open, future-proof system architecture. TAC Xenta
controllers provide access to a standardized LonWorks
®
-based network technology
supporting a flexible control system to which components from other manufacturers
can be connected.
The TAC Xenta 100 line consists of LonMark
®
-certified zone controllers designed
for specific applications such as fan coil, VAV, chilled ceiling and rooftop air handling
units.
The TAC Xenta 280 and 300 series of LonMark
®
-certified programmable controllers
are intended for any type of plant room control applications.
The LonMark
®
-certified TAC Xenta 401 controller and the TAC Xenta 400 I/O
modules are programmable and intended for larger applications.
The TAC Xenta 511 is a cost-effective method of monitoring small-scale LonWorks-
based networks. The TAC Xenta 511 works like any web server, making it easy to
monitor and control operations over the Internet.
The TAC Xenta 911 is an Ethernet communication device that lets you communicate
with your LonWorks network over TCP/IP.
The TAC Xenta 913 is a multi-protocol gateway bridging the gap between
different protocols and communication technologies – e.g. linking BACnet
TM
,
MODBUS
®
or M-bus to LonWorks.
The TAC Xenta 527 is a cost-effective method of integrating the I/NET security
system into TAC Vista.