Datasheet

98
Heating Controllers
TAC 2000 Viewer
for TAC 2000 Heating
Controllers
TAC 2000 is a PC-based information tool intended for commissioning,
operation and troubleshooting in heating systems with controllers belonging
to the TAC 2000 family. By connecting a PC running TAC 2000 Viewer to
a TAC 2000 controller, you get a quick and clear overview of the control-
ler and the controlled heating application. All measured and setpoint values
are shown in clear function diagrams. The controller’s parameters are shown
together with its reset curves in clear forms. The pictures and forms are
complete, which saves time, since you do not need to configure anything or
work on the picture layout.
The TAC 2000 Viewer supports the TAC 2112, 2222, 2242, and 2321
controllers.
• Language: Swedish, English, German
• Modem: Hayes compatible, 4800 bps
System requirements, PC
• Windows™ 95 or later
• Min. 4 MB Internal memory
• Min. 2 MB Hard disk space
• One 3 1/4” diskette drive
• One 9 pin serial port
DESCRIPTION
200-1900-000 InTA 2000 (Connector)
FUNCTIONAL FEATURES
• Dynamic Colorgraphic
• Trend log viewer
• List of all parameters in the
controller
• Status of In- and outputs
• Direct connection or dialed up
via modem
• Windows
TM
95 or later