User`s guide

63230-216-217/A2 Basic Operation

9/2002 Refreshing (Reloading) the Power Server User Interface

NOTE: The first time you connect to the Power Server, you will see a prompt

asking you to install the

POWERLOGIC Web Downloading Interface. Click

Yes to install the control. You are only required to do this once for each

remote PC. You must be logged on to your PC as an Administrator to do this.

Adding the Power Server User Interface to

Your Favorites in Internet Explorer

To avoid typing the IP address every time, you can add the Power Server

home page to the Favorites folder. To do so, use one of the following

methods:

• If after typing the IP address, the Power Server user interface displays the

home page as shown in Figure 1 on page 2, click Favorites > Add to

Favorites and name your Power Server as you choose.

• If a default page was set up earlier (see “Working with Lists on the

PWRSRV750 Power Server User Interface” on page 37), do the following:

a. Restore defaults on the Default Page Preferences page and then

refresh the browser.

b. Add the Power Server to your Favorites.

c. Set up your default page.

REFRESHING (RELOADING) THE

POWER SERVER USER INTERFACE

To refresh (reload) the Power Server web pages, click the Home tab in the

user interface toolbar. The Power Server interface refreshes and the home

page shown in Figure 1 on page 2 displays.

NOTE: If you defined a default page in the Preferences dialog, that page will

display instead of the home page shown in Figure 1 on page 2. (See

“Working with Lists on the PWRSRV750 Power Server User Interface” on

page 37 for instructions on defining a default home page.)

Home tab