User`s guide

Basic Operation 63230-216-217/A2
Connecting to the Power Server User Interface 9/2002
© 2002 Schneider Electric All Rights Reserved
4
2. Touch the welcome screen to launch the Power Server user interface.
The Power Server Home page displays.
If the touchscreen displays a black screen, simply touch the screen to
bring the display out of sleep mode.
Connecting to the Power Server from a
Remote PC
To connect to the Power Server from a remote PC, do the following:
1. Start Internet Explorer (version 5.5 or higher).
2. In the Address field, type http:// followed by the IP Address for the
Power Server.
3. Press Enter or click Go.
The Power Server splash screen displays briefly and then the home page
displays.