User`s guide

Setting User Preferences 63230-216-217/A2
Changing the Sample Rate 9/2002
© 2002 Schneider Electric All Rights Reserved
32
CHANGING THE SAMPLE RATE By default, the Power Server samples data and updates real-time displays
once every five seconds and data in diagrams once every ten seconds. The
current sample rate is displayed in the lower left corner of the Power Server
Browser’s window.
To change the sample rate, do the following:
1. Click the Maintenance tab.
2. Click the Preferences button.
The Power Server displays the Preferences page.
3. Select Sample Rate from the list on the left side of the page.
The Sample Rate setup displays.
4. Select desired sample rates for real time data and diagram data [750].
5. Click the Home button to save changes.
The new sample rate should be displayed in the lower left corner of the
Power Server Browser.
CHANGING THE DEFAULT PAGE When you connect to the Power Server by entering its IP address in Internet
Explorer, the Power Server home page displays (see Figure 1 on page 2).
The Default Page preference lets you configure the Power Server to
automatically display any of the following pages:
•Meters
• Bar Charts
•Tables
• Diagrams (PWRSRV750 model only)
• Alarms (PWRSRV750 model only)
To change the default page, do the following:
1. Click the Maintenance tab.
2. Click the Preferences button.
The Power Server displays the Preferences page.
PWRSRV750
model only