User`s guide

63230-216-217/A2 Power Server Model PWRSRV750 Operation
9/2002 Using Reports
29
© 2002 Schneider Electric All Rights Reserved
USING REPORTS
Creating Reports You can use Information Manager, a module that is available in the system
setup utility, to create historical reports on the Power Server. Follow these
steps:
NOTE: See “Prerequisite Information Covered in the Power Server Setup
Guide” on page 1 if you are not yet familiar with operating the Power Server.
1. Use NetMeeting to access the Power Server.
2. Press Ctrl-W to display the Power Server desktop.
3. Put the Power Server in Setup Mode.
4. Redial the Power Server in NetMeeting to reconnect.
5. Press Ctrl-W to display the Power Server desktop.
6. Click the POWERLOGIC Reports Setup icon to start SMS Information
Manager.
7. Click File > New to launch the PowerLogic Reports wizard.
Refer to online Help for instructions on using the report creation wizards.
From the SMS Information Manager application menu, click
Help > Contents and find the topic for the type of report you want to
create.
8. Put the Power Server back in Run Mode. This may take up to five
minutes.
9. Once the Power Server has restarted, click the Home tab on the Power
Server user interface to refresh and make the report available for viewing
when you click the Reports button on the Historical page. It should
display in the tree list on the left side of the window.