User`s guide

Power Server Model PWRSRV750 Operation 63230-216-217/A2

Using Alarms 9/2002

3. Click the waveform icon.

• If only one waveform is available for that alarm, then that waveform

displays.

• If multiple waveforms are available for the same alarm, the Waveform

Selection Dialog displays.

Click the type of waveform you want to view and make your selection

from the list. Click OK.

The waveform page displays.

4. You can click buttons on the waveform dialog toolbar to view the following

information:

• All—Click here to view graphs (all three voltage phases and all three

current phases) of the waveform.

• Va—Click here to view phase A voltage.

• Vb—Click here to view phase B voltage.

• Vc—Click here to view phase C voltage.

• Ia—Click here to view phase A current.

• Ib—Click here to view phase B current.

• Ic—Click here to view phase C current.

• In—Click here to view Neutral current.

• Ig/Ir—Click here to view ground current. If the device is a CM2000, click

here to view residual current.