User`s guide

63230-216-217/A2 Power Server Model PWRSRV750 Operation

9/2002 Using Alarms

view, the alarms are not updated. Watch for the refresh icon. The refresh icon

will display anytime new entries have been added in the alarm log on the

Power Server.

Viewing Waveform Information From the Alarm Log

If you configured a device to trigger a waveform on a particular alarm and

also assigned a PC task in the Power Server Setup to retrieve that waveform,

then a waveform icon appears next to that alarm once the waveform has

been retrieved from the device. All alarms within two seconds of the time of

the occurrence for a particular device have the waveform icon associated

with them.

Depending on the size of the waveform, you may see an alarm entry in the

alarm log with no icon associated. The Power Server waits to have the

waveform uploaded from the device before displaying the waveform icon

link.

For the icon feature to work properly, ensure that the Power Server has

uploaded all the latest waveforms from each device. See “Using Waveforms”

on page 26.

To view waveform information from the Alarm Log, follow these steps:

1. Click the Alarms tab.

The Active Alarms page displays.

2. Click the Alarm Log button.

The Alarm Log page displays.

Click the waveform icon to view the

waveform(s) associated with that

alarm.