User`s guide

Power Server Model PWRSRV750 Operation 63230-216-217/A2

Using Alarms 9/2002

14. Click the Diagrams tab.

The new diagram should display in the tree list on the left side of the

window. Refer to “Changing the Sample Rate” on page 32 for setting the

sample rate that data updates in diagrams. The default sample rate is ten

seconds.

Viewing Diagrams To view diagrams, do the following:

1. Click the Diagrams tab.

2. Select the diagram from the list on the left side of the page.

The diagram displays.

USING ALARMS

Configuring Alarms Using the PowerLogic System Setup application, you can configure analog,

digital, or onboard alarms that will be annunciated in the Power Server

PWRSRV750 user interface. The following information is available in online

Help:

• For an overview, see Help > SMS-3000 Help > Quick Starts > Quick Start:

Functions and Alarms.

• For configuring onboard alarms, see Help > SMS-3000 Help > Working

with Functions and Alarms > Setting Up On-Board Alarms.

• For digital alarms, see Help > SMS-3000 Help > Setting Up PC-Based

Functions and Alarms.