User`s guide

63230-216-217/A2 Power Server Model PWRSRV750 Operation
9/2002 Using Diagrams
17
© 2002 Schneider Electric All Rights Reserved
CHAPTER 3—POWER SERVER
MODEL PWRSRV750 OPERATION
The Power Server Model PWRSRV750 has all the capabilities of the
Power Server Model PWRSRV710 as well as additional functionality. This
chapter covers these additional capabilities of the PWRSRV750.
USING DIAGRAMS
Creating Diagrams GFX-1000 is a color graphics program that lets you create diagrams for
viewing real-time data from your Power Server PWRSRV750 user interface.
You can quickly create simple custom diagrams. To do so, follow these steps:
NOTE: See “Prerequisite Information Covered in the Power Server Setup
Guide” on page 1 if you are not yet familiar with operating the Power Server.
1. Use NetMeeting to access the Power Server.
2. Press Ctrl-W to display the Power Server desktop.
3. Put the Power Server in Setup Mode.
4. Redial the Power Server in NetMeeting to reconnect.
5. Press Ctrl-W to display the Power Server desktop.
6. Double-click the Powerlogic Server icon on the desktop.
7. Enter master for both username and password.
8. Double-click the Powerlogic System Setup icon on the desktop.
9. Enter master for both username and password.
10. Click File > New > Diagram.
11. Create the diagram.
See Help > SMS-3000 Help > GFX-1000 for instructions on how to create
diagrams. In particular, refer to “Types of GFX Objects” under this
heading for guidelines on the types of diagrams you can create.
NOTE: If you prefer to use one of your own backgrounds in your diagram,
use the File Transfer procedure in NetMeeting to transfer the custom
background. Copy the background from the C:\NetMeeting Received
files directory to the C:\SMS-3000\Drawings\Backgrounds directory. See
the appendix on “Uploading and Deleting Files on the Power Server” in
the Power Server Setup Guide 63230-216-207.
12. Put the Power Server back in Run Mode. This may take up to five
minutes.
13. Once the Power Server is started, restart Internet Explorer and browse
the Power Server user interface.
NOTE: It is necessary to restart Internet Explorer to see most changes to
a diagram take effect.